电化学反应器隔膜材料的分子设计与介尺度策略

电化学反应器中隔膜材料是将正极和负极在电子通路上隔开但在离子传输通路上保持畅通的特殊材料。作为电化学反应器三个关键材料之一，隔膜材料还需耐强酸/强碱和高电压等环境。围绕电化学反应器中隔膜材料，从分子设计的角度针对材料电化学性能与化学稳定性的调控、电化学装置的介观传质性能的促进和改善等研究思路与进展进行了综述，为相关研究提供性能导向的分子设计参考。     

核电厂聚乙烯管道设计方法及标准简介

随着聚乙烯管道在三门核电厂、大亚湾核电厂中的试应用成功，大量的新建核电厂及核电厂改造项目均将聚乙烯管道作为海水冷却水管道系统的首选管材，自主研制核电厂聚乙烯管技术标准迫在眉睫。本文介绍了核电聚乙烯管道的发展历史和应用现状，对比了核安全3级聚乙烯管道和非核安全相关聚乙烯管道、城市燃气与给水聚乙烯管道技术标准的设计方法及适用范围，探讨了中国目前聚乙烯管技术标准与核3级聚乙烯管道技术标准的差异与差距，为核电厂聚乙烯管道的设计制造与标准研制提供参考。     

水泥辊压机终粉磨系统的工业化应用

介绍了水泥辊压机终粉磨系统及运行情况,与辊压机联合粉磨系统生产的水泥以及所配制的混凝土进行了对比,水泥辊压机终粉磨系统电耗大幅降低,两种水泥所配制的混凝土性能相当。     

基于STM32的开环霍尔电流传感器的温度补偿研究

研究了一种基于软件补偿结合恒流源补偿的改进温度补偿方法,应用单片机、恒流源、数字温度传感器、乘法器等硬件电路,对传统软件补偿进行了优化,补偿效果较传统恒流源补偿有了明显提升,“温漂”整体下降了约13.7%。在传统的温度补偿方法如热敏元件补偿、恒流源补偿、软件补偿等方式上做了补充,对于霍尔电流传感器精度的提升及实际生产需求的满足有重要意义。     

5G基站供配电勘察设计思路的调整分析

针对5G基站设备相对于以往2G/3G/4G设备的变化,面向一线勘察设计人员,阐述5G基站在供配电需求方面功耗增大、供电方式多样化、供配电改造工作量和难度加大等相应变化,归纳相应的勘察前期准备工作要点,分析在实际工作中可能面临的外市电引入改造、供电方式选择的多样性、新型锂电池应用等重点、难点,介绍理想的5G供配电模式及发展方向,最后提出5G基站供配电勘察设计工作思路调整的建议。     

浅析小型水电站厂用电节约的优化措施

水电站厂用电指标使用综合厂用率,反映电站厂用电消耗的实际情况,可通过厂用电率合理性分析电站厂用耗电情况以及节能降耗挖潜的空间,促进厂用电的合理管理,提高电站效益。文章结合华能甘肃水电开发有限公司管控的6座小型水电站厂用电管理实践,分析了影响水电厂用电损耗的相关因素,提出了厂用电节能降耗的应对措施。     

An Improved Torque Sensorless Speed Control Method for Electric Assisted Bicycle With Consideration of Coordinate Conversion

In this paper, we propose an improved torque sensorless speed control method for electric assisted bicycle, this method considers the coordinate conversion. A low-pass filter is designed in disturbance observer to estimate and compensate the variable disturbance during cycling. A DC motor provides assisted power driving, the assistance method is based on the real-time wheel angular velocity and coordinate system transformation. The effect of observer is proved, and the proposed method guarantees stability under disturbances. It is also compared to the existing methods and their performances are illustrated through simulations. The proposed method improves the performance both in rapidity and stability.      

柔性钙钛矿太阳能电池的制备及性能研究

采用钛箔作为衬底,原位生长二氧化钛薄膜,然后制备有机钙钛矿吸收层及固态空穴传输层,组装成太阳能电池。通过电压-电流曲线测试,结果表明,这种钙钛矿太阳能电池的光生电压达到0.8 V、光生电流达到16 mA/cm²、光电转化效率为10.2%。进一步对电池进行弯折试验,弯折20次后,光电转化效率能达到初始值的85%,表现出良好的柔性特征。     

A review on China's wind power accommodation in the background of “Internet+” strategy

The consumption of fossil fuel has resulted in global warming, environmental pollution, and many other crucial problems. Replacing fossil fuel with renewable energy has become an important issue over the recent decades. As a renewable clean energy, wind power is a relatively well‐developed and promising energy method for current technology development in China. Under the background of growing demand for electricity and enhancing awareness for environmental, the “Internet+ wind power” concept has emerged based on both the wind power's characteristics that renewable and non‐polluting, and the rapid development of the Internet in China. Through querying an amount of literature and information, this paper reveals the resource endowment and policy environment about wind power and energy Internet at first. Then, the PEST‐SWOT strategy analysis model is used to analyze the internalities (strengths and weaknesses) and the externalities (opportunities and threats) of “Internet+ wind power”. According to these results, the paper puts forward some measures (development and utilization, business mode) for wind power accommodation. Then some policy recommendations have been proposed. The government should provide favorable conditions for wind power grid with the “Internet+” technology innovation.